Inspect the condition of the nozzle as well, and if it’s too worn, replace it. Remove all the unnecessary contaminants, and I recommend using a filter inside the tube to prevent further clogging. After regular use, dirt and debris can gather in the injector tube, preventing the siphoning of the detergent. The next step is to check the nozzle and valve area for any blockages hindering the soap injector. Step 2: Check for Any Blockages in the nozzle, tube, and hose.If you have an adjustable nozzle, set it to the widest angle. The last one isn’t suitable to use with the soap dispenser. Check the nozzle and ensure that you use the dedicated soap nozzle and not a high-pressure nozzle. If your soap dispenser isn’t working correctly, I have noticed that the wrong type of nozzle is used in many cases. Compared to other nozzles, the soap nozzle has a lower output pressure and a wider spray. This is usually a black 65-degree nozzle. Almost all pressure washers come with a separate soap spray nozzle. The first step is to check the spray nozzle. You can use the following steps to troubleshoot the soap dispenser of your pressure washer: Lastly, take out the soap injector kit from the pressure washer and check it. Clean the detergent tank after pressure washing. Make sure you use the correct ratio of soap solution and water.

Examine the nozzle, valves, and host for any blockages that can restrict the flow of detergent. This will lower the output pressure and spray a larger area. I recommend using a black 65-degree nozzle. Generally, if the soap dispenser of your pressure washer isn’t working, first check the spray nozzle. Pressure Washer’s Soap Dispenser Doesn’t Work, some helpful tips 2 Pressure Washer Won’t Mix Detergent With the Spray.1 Pressure Washer’s Soap Dispenser Doesn’t Work, some helpful tips.

Husky 3000 psi pressure washer